Pricing, draft previews, references, and the cost of a finished shot
SEQUENCER
9 min read
Based on the Sequencer model catalog checked November 17, 2026. Covers are editorial illustrations.
Contents
The creative brief
A shelf full of identical bottles is a useful budget test. One visually striking take can still be unusable if the chosen bottle changes shape in the actor’s hand. Sequencer offers Seedance 2.5 at 480p, 720p and 1080p, with durations from 4 to 30 seconds.
What goes into the clip quote?
A Seedance budget starts with the complete request: duration, resolution, input media, and the chosen workflow. Sequencer currently offers 480p, 720p, and 1080p output for clips from 4 to 30 seconds. Use the current studio quote with the intended inputs so the estimate describes the shot you actually plan to make.
Reference-guided generation, start/end-frame generation, video editing, and video extension have different input combinations. Choose the workflow first. For this product shot, a starting image is a straightforward way to establish the shelf, the shopper, and the exact bottle that will leave the shelf.
Sequencer settings
Seedance 2.5 settings in Sequencer
Setting
Available options
Resolution
480p, 720p, or 1080p
Duration
4–30 seconds
Test settings
5 seconds at 720p, then 1080p with the same references
Budget the product shot step by step
Choose Seedance 2.5 and a five-second duration in the video studio. Prepare a starting frame with a clearly visible target bottle and enough room around the hand for the lift.
Set 720p, add the intended input, and read the quote. Change only the resolution to 1080p and record the second quote. Keep the same duration and media so you can see what that one decision changes.
If you choose Draft preview, generate the 480p draft to evaluate the movement before requesting its matching 1080p final. Treat the draft and final as two separately billed steps in the budget.
Use the prompt below and record each attempt. Check the bottle’s shape, the contact with the fingers, and the label through the quarter turn. Count a take as accepted only when it can be used in the intended edit.
Try the prompt
Five seconds, locked camera. A shopper in a silver jacket lifts one chrome bottle from the middle shelf, turns it a quarter turn, and holds it upright.
Request a Sequencer quote for five seconds at 720p with the intended references. Quote the same inputs at 1080p to isolate resolution cost. Track the total spent across attempts and divide by accepted takes. That figure is a useful estimate for the next product in the series.
Measure cost per accepted take
Add the cost of draft previews, final renders, and rejected attempts, then divide by the number of usable takes. For an illustrative budget, $12 spent to obtain three accepted clips is $4 per accepted clip. Keep that figure with the prompt and settings; it is more useful for planning the next product than the price of a single lucky generation.
Keep input strategy consistent when comparing costs. Start/End Frames and reference media are separate workflows in Sequencer. Reference Video, Extend Video, and Edit Video are also alternative inputs. For audio, decide whether the shot needs generated sound, then check the quote for that complete request. Higher bitrate changes file compression and delivery size, so choose it for the intended output requirements.
Read the quote for a complete request
A useful cost comparison starts with an identical production request. Record the selected model, output resolution, duration, audio choice, input files, and whether you are generating, editing, or extending. Then read the current studio quote. A number copied from a different input configuration may describe a different amount of work, even if the model name is the same.
The Sequencer catalog lists Seedance 2.5 with video-token pricing. Treat the quote for the configured job as the useful spending figure. Multiplying a displayed catalog rate by the number of seconds does not by itself reproduce a token-based total. Input media and the selected workflow can affect the request that is priced. Save the quoted amount alongside the settings when building a production estimate.
Make a small comparison sheet with one row per configuration. For the bottle shot, compare five seconds at 480p, 720p, and 1080p using the same opening image. If you later add a reference video or switch to Edit Video, add a new row rather than overwriting the earlier quote. This keeps the reason for a price change visible.
Plan the draft and final as two paid steps
Draft preview is a specific workflow: it creates a 480p preview that can later be rendered as a matching 1080p final. Both steps are billed. Use the preview to judge the action, composition, and timing before paying for the final. The final still needs inspection for product detail, compression, and any issue that was difficult to see in the smaller preview.
A lower-resolution direct generation and a Draft preview should be recorded separately in the budget. One is a completed generation at a selected output size. The other is a preview with a matching final-render path. Choose the workflow around the production decision you need to make, then include every requested render in the total.
Suppose a team sets aside a hypothetical $20 for a product shot. If previews use $5 and selected finals use $9, the remaining $6 is available for revisions or another shot. The amount per preview in this example is not a model price. It illustrates why committing the entire budget to finals before inspecting the movement leaves little room to solve a contact or identity problem.
Choose frames, reference media, editing, or extension
Start/End Frames and reference media are alternative input strategies in Sequencer. A starting frame is useful when the shelf arrangement, actor, and target bottle already have an approved composition. An ending frame can specify the bottle held upright after the lift. Keep those frames consistent so the model is connecting two states of the same shot.
Reference media suits a different need: explaining the subject, movement, or sound through supporting examples. Choose references by role and remove redundant material. Reference Video, Extend Video, and Edit Video are alternative video inputs. Extension continues an existing clip; editing changes a supplied clip and follows its source duration and ratio. Select the task before comparing quotes.
For a bottle campaign, a movement reference might explain the speed of a quarter turn, while a product reference explains the cap and label. If the production already has an approved performance, editing that video may be the more relevant test. Avoid comparing its price directly with an unrelated text-only generation and calling the difference a model efficiency result.
Build a realistic cost-per-shot worksheet
Separate technical success from editorial acceptance. A generation can complete and still fail because the bottle bends, the wrong product is lifted, or the hand hides the label at the required moment. Count those attempts in the production spend. Define the acceptance conditions before generating so the estimate does not improve simply by lowering the standard after the budget has been spent.
For illustration, imagine six attempts costing $2 each and two accepted takes. The generation cost per accepted take is $6. If one of those clips also needs a hypothetical $3 finishing step, the combined spend becomes $15 across two accepted clips, or $7.50 each. These are arithmetic examples for planning, not a current Seedance quote. Replace each amount with the actual charge for your configured job.
Keep notes on why attempts failed. Repeated product distortion suggests a reference or action problem. Repeated timing failures suggest a shorter action or clearer sequence. A quote comparison tells you how settings change the charge; the acceptance notes tell you how to reduce the number of attempts. Both are needed to estimate the next ten products responsibly.
An illustrative production budget, not model pricing
Budget item
Example spend
What to record
Six attempts
$12
Settings and rejection reasons
Finishing one take
$3
Required cleanup
Two accepted takes
$15 total
Average $7.50 per accepted take
Make the product action easier to approve
Give the shopper one target and one clear sequence. Establish the middle-shelf bottle before the hand moves. Ask for a lift, a quarter turn, and a hold. Keep the camera fixed for the first test so the product rotation is easy to inspect. The silver jacket and chrome environment should support the product without making its outline disappear into a field of reflections.
A more explicit prompt can identify the contact and ending state: the right hand closes around the center bottle, lifts it clear of the shelf, turns its front label toward the camera, then holds it upright at chest height. Preserve the neighboring bottles and the shelf edges. Review the cap, body width, label, fingers, and reflection through the entire turn.
When an attempt fails, change the relevant instruction. If the hand selects the wrong bottle, improve the opening composition or name a clearer position. If the label disappears, reduce the turn or extend the final hold. If the product changes shape, simplify the movement and improve the product evidence. Keep the successful take before trying a more ambitious camera move.
Choose final settings for the destination
Use resolution for the intended placement. A mobile preview can reveal action problems, while a final product close-up needs enough detail to inspect the label and cap. Seedance 2.5 currently offers 480p, 720p, and 1080p in Sequencer. Decide whether generated audio belongs in the finished edit, then compare quotes with that choice held consistent.
Standard and High bitrate control compression and file size. Choose the delivery setting for the destination and inspect the resulting file in the actual edit. High bitrate is a delivery decision; product accuracy still depends on the generated content. Keep the approved clip, its quote, input set, and acceptance notes together so the next campaign estimate starts with evidence from a comparable task.
Common questions
Is a draft preview the same as a final render?
Draft preview creates a 480p preview that can later be finalized as a matching 1080p output. Both steps have their own charge. Use the draft to assess the staging and movement, then inspect the final output before delivery.
Can I combine frames with every reference type?
Choose either the Start/End Frames workflow or the reference-media workflow. The studio applies the supported combinations for the selected model. Keep only the inputs needed for the test so both the brief and the quote remain easy to understand.
How should I compare generation prices?
Use the same duration, resolution, input media, audio choice, and workflow. Read Sequencer’s current quote for that request, then include the attempts and finishing work needed to obtain an accepted result.